ISFOE-Category

Info

The objective of the Workshop is the reveal the huge potentiality of in-line and real-time metrology methods (tools, measurement/analysis methodologies, protocols, integration concepts) to revolutionize the digital manufacturing of advanced materials, devices, components, processes and products based on Organic & Printed Electronics.

The Workshop topics include:

• In-line/In-situ/Real-Time characterization tools and methodologies
• Non-destructive metrology methods and tools
• Novel Instruments and Improvements
• Optical, Electrical, Structural, Visual characterization
• Characterization protocols and standards
• Modeling and analysis approaches
• Integration concepts in pilot and production lines
• Defect inspection from nano- to macro-
• Thin film monitoring and optimization of processes
• Feedback, Quality Control and Automation
• In-line Process in Roll-to-Roll, Vacuum and Gas Transport
• Manufacturing & Applications

Workshop International Organizing Committee

S. Logothetidis, Nanotechnology Lab LTFN, AUTh, Greece
N. Li Pira, Centro Ricerche FIAT, FCA Group, Italy
M. Klein, Suragus, Germany
C. Camus, Laytec, Germany
T. Burke, IBS, The Netherlands
G. Winroth, European Commission, Belgium

Organized by:

	EU H2020-SMARTLINE: "Smart In-line metrology and control for boosting the yield and quality of high-volume manufacturing of Organic electronics" (www.smartline-project.eu)
	REALNANO: "In-line and Real-time digital nano-characterization technologies for the high yield manufacturing of Flexible Organic Electronics" (www.realnano-project.eu)

This Special Workshop is co-organized by NAMEC, LTFN, HOPE-A and the NANOTEXNOLOGY Organizing Committee and will gather coordinators of European Projects, technology and market experts and representatives from industry.

Organized by:

Workshop's Objectives

• Highlighting key results of the H2020 Projects in the field of Nanotechnologies and Advanced Materials for OPVs and Perovskites
• Identifying common R&I priorities in order to bridge the gap between the lab and the market and providing recommendations to the European Commission
• Promote networking between the stakeholders from the Academic, Research and Industrial Communities in EU in order to harmonize best-practices on the development and manufacturing of OPVs & Perovskite PVs and their integration to high volume applications and markets

Presented EU Projects (Tentative List)

	CHEOPS - Achieving low-cost, highly efficient perovskite solar cells www.cheops-project.eu Mr. Arnaud Walter, CSEM, Switzerland
	CORNET - Multiscale Modelling and Characterization to optimize the Manufacturing processes of Organic Electronics materials and devices www.cornet-project.eu Ms. Foivi Logothetidi, Hellenic Organic & Printed Electronics Association (HOPE-A), Greece
	InSCOPE - Open-access pilot line to accelerate industrial uptake of hybrid printed electronics inscope-project.eu Dr. Gari Arutinov, Holst Centre, The Netherlands
	MAESTRO - Making perovskites truly exploitable www.maestro-itn.eu Dr. Andreas Kaltzoglou, Inst. of Nanoscience and Nanotechnology, NCSR Demokritos, Greece
	NAMEC - Nanotechnologies and Advanced Materials for Energy Cluster www.namec-cluster.org Dr. Simon Perraud, CEA LITEN, France
	SMARTLINE - Smart In-line metrology and control for boosting the yield and quality of high-volume manufacturing of Organic electronics www.smartline-project.eu Dr. Argiris Laskarakis, Nanotechnology Lab LTFN, AUTh, Greece
TRANSPENERGY	TRANSPENERGY - Semi-transparent and color-on-demand solar cells - Dr. Marco Stella, Eurecat, Spain

Workshop's Committee (tentative)

Dr. Argiris Laskarakis, Nanotechnology Lab LTFN & ISFOE18 Organizing Committee

Dr. Simon Perraud, CEA & NAMEC cluster (simon.perraud [at] cea.fr)

About NAMEC: NAMEC is an overarching cluster set up in 2016 by the European Commission, in order to regroup all European projects focused on nanotechnologies and advanced materials for low carbon energy, energy storage and energy efficiency technologies. NAMEC builds on the experience of the EU PV Cluster, which has run with success since 2010 to highlight the key enabling role of nanotechnologies and advanced materials for photovoltaics.

Info

A prerequisite for the enhancement of the innovation capacity of European (as well as global) industries in the fields of Organic Electronics and Nanotechnologies is the adoption of an Open Innovation environment which is an open framework process that can accelerate innovation through collaboration between expert stakeholders from academic, research and industrial communities. The adoption of an Open Innovation approach allows the breaking down of boundaries that prohibit the internal ideas and approaches to be adopted by other entities, which would facilitate the mutual progress in relevant fields without duplication of effort in national, European and global levels.

Europe embraced Open Innovation in characterization and modeling by supporting the implementation of cutting edge research in selected topics that cover Organic Electronics, Microwave Microscopy and advanced nano-architectured and bio-inspired hard/soft interfaces.

The combined efforts to promote and progress in state-of-the-art Scientific and Research fields requires the compatibility with internationally accepted roadmaps and frameworks, towards the development of future standards.
During the Workshop a series of Invited talks, Oral and Poster presentations will be given by representatives from currently running EC R&D projects in that cover different aspects of Open Innovation for materials characterization & modeling (ranging from the atomic to the macro-scale or multiscale) applied on a broad range of subjects and applications.

The Workshop topics include:

• Open Innovation for multiscale modeling of materials
• Open Innovation for multiscale characterization of materials
• Modeling Data Analysis (MODA)
• Process and Manufacturing
• Standardisation needs in the manufacturing sector
• Industry needs on Open Innovation approaches
• Business Models and Sustainability for Open Innovation Databases

Workshop International Organizing Committee

S. Logothetidis, Nanotechnology Lab LTFN, AUTh, Greece
F. Castro, National Physical Laboratory, UK
D. Dykeman, Granta Design, UK
M. Sebastiani, Department of Engineering, Università degli studi Roma Tre, Rome, Italy
C. Charitidis, Department of Materials Science and Engineering, School of Chemical Engineering NTUA, Greece
G. Dambrine, University of Lille Nord de France, France

Organized by:

	EU H2020-CORNET: "Multiscale Modelling and Characterization to optimize the Manufacturing processes of Organic Electronics materials and devices" (https://www.cornet-project.eu)

The collaboration between HOPE-A and IAPE is a main driver for the advancement of the Greece-China Cooperation in Technology, Innovation and Business in the era of Organic and Printed Electronics (OEs). HOPE-A is the Hellenic Organic and Printed Electronics Association, while IAPE stands for Innovation Alliance of Printed Electronics of China.

The topic of this Joint Workshop is to promote networking, twinning, joint ventures and business between members of HOPE-A and IAPE and their associated partners in order to foster the creation of partnerships, B2B and collaborations through bi-lateral and/or under EU H2020 programmes between Greece and China.

This Joint Workshop will present the current state of technology and entrepreneurial activities of the HOPE-A and IAPE partners in Greece and China on Organic and Printed Electronics nano-materials, devices (OPVs, OLEDs, OTFTs, sensors, etc), equipment, precision metrology tools, manufacturing processes, integrated systems and products, and applications in Energy, Lighting, Electronics, Automotive, Healthcare, 3D printing, Wearables, Internet of Things, to name but a few.

 Download the HOPE-A - IAPE Joint Workshop Agenda

Supported by: